How to Build Wooden Planters: Instructions

swapna460

Wooden planters offer a very pleasant aesthetic result and serve a great function. Although the manufacturing process has a certain complexity, in this tutorial we are going to show you step by step how to make a planter with this type of material. Difficulty difficulty Half . It is advisable to have some experience in using the tools. We are going to offer you a general explanation and, therefore, the process may vary slightly depending on the specific case. However, first of all, it is important that you are clear about what materials and tools you may need. materials and tools Materials and tools Level - Meter - Hammer - Screwdriver - Jigsaw - Drill - Sandpaper - Wooden slats - Nails and/or screws - Wooden dowels - Glue - Varnish.

It is also important to take appropriate safety measures to avoid accidents: That is why it is advisable to use work gloves and glasses. If you don't want to take the risk, you always have the option of hiring a professional carpenter. On the other hand, if you want to get to work, below Phone Number List we show you the steps to build a planter. Do you prefer to have a carpenter to make the planter? Back to the start  Cut the wood First of all, it is advisable to take measurements on the wooden planks that you are going to use. You have to assess how much space is available in the area where you want to place the planter and, from there, establish the size of the base, the two longest walls and the two shortest walls. In total, you will need five boards.



If the boards you purchased are not wide enough, you may need to combine several boards to create each side of the planter. When you are clear about the measurements, mark with a pencil where you should cut the wood. You can then cut using the jigsaw. You can also sand the edges and surface of the boards to achieve a better finish. In many cases it is recommended to use treated wood , especially if the planter is going to be placed in an outdoor area. Assemble the planter structure The next step is to secure the different sides of the planter to each other: You must make holes at the ends of the longer sides and at the edges of the shorter sides, so that they can fit. You can use plugs or studs to fit pieces together, although you can also fix them directly with nails or screws.